4) with iDeneb running safe mode, insert iPC dvd and install from there 5) deleted Extension.mkext as recommended in release notes of the Install DVD 6) installed decrypter, disabler and bootloader with OSx86 Installer, check boot delay 5 seconds.

1. How To Install Ipc Osx86 On Pc Windows 10
2. How To Install Ipc Osx86 On Pc Mac
3. How To Install Ipc Osx86 On Pc Windows

Update: I got my new laptop and i'm making an instructable for 10.5.2, look for it within the next few days. I AM IN NO WAY RESPONSIBLE FOR WHAT YOU DO WITH THIS INFORMATION. PLEASE KEEP IN MIND YOU MUST BE AN APPLE DEVELOPER TO INSTALL MAC OS X ON YOUR PC WITHOUT BREAKING THE TERMS AND CONDITIONS/EULA! I AM NOT RESPONSIBLE FOR THE METHOD USED TO GET THE INSTALL DVD FOR THIS PROJECT.YOU MUST HAVE AN OS X TIGER LICENSE TO USE THE DVD.

You need: -a pc with windows xp or vista preinstalled -'JaS 10.4.8 AMD Intel SSE2 SSE3' dvd/iso (please seed when done) -if you have an intel processer with SSE3 (see step 2) then use. (smaller file) (please seed when done) -20 gig hard drive -cpu-z (-other software (as needed) -experience w/ computers Step 1: Cheak Compatability & Backup.

Put the JaS dvd in the drive (yes, finally), boot the computer and hope for the best. Press any key and you will get a bunch of text, and more text. Then the text will change and you get 10x more text than before. Just wait until you are asked for your language. Once you see 'welcome to JaS.'

You go up to the top of the screen, click utilities, and click disk utility. You need to select the partition you made earlier for os x and erase it as The mac os filesystem (journaled), aka the top one. Name it somthing that you would like to see on your desktop because it will be there. Once it is formatted, close the disk utility and continue through the prompts. Pics are from phone.

Step 4: Select What to Install. Go to (while in os x) your mac partition, applications, utilities, terminal. Paste 'sudo nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist' (without quotes) enter your password, it will be hidden. Add these four lines if they do not already exist Quiet Boot No Timeout 7 the file should now read:

Just select what you want to boot. Before any of you attempt this DO SOME RESEARCH. Check of system/hardware compatability. More than likely if you did not know about booting OSX to your PC you will not have a clue about how to manually install the proper drivers.

If your monitor is ATI Mobility Ratheon 7500, you will have to manually install the drivers for it. Which means you will have to know how to use Terminal. Also, it means you will have to find the proper driver package. Booting OSX on a pc does work, but it is not as simple as just creating a partition, booting OSX. It would be great if this instructable showed how to use terminal to load drivers using terminal. A good way to partition and get around the pesky access denied phase is to DEFRAGMENT THE FREE SPACE. It's very simple, and it works.

Go into a third party defragmenter (AKA defraggler) and defragment the free space under file. Then go into the vista defragmenter and try again. If it doesn't work, then make sure you defragmented the entire free space so there's no fragments. It doesn't matter if you have fragments in the main drive, only the free space, though it's a good idea to defragment the used space, too.

How To Install Ipc Osx86 On Pc Windows 10

Install OSX Leopard on EeePC 900 – Fully Working! OSX installed on the second internal 8GB SSD memory of the EeePC 900. Download iPCOSx861056UniversalPPF5Final.rar from thepiratebay.org and unrar it to get the iso 2. Burn the iso onto a DVD 3.

You need an external USB DVD player. Plug it into the EeePC and insert the OSX Leopard DVD (iPC OSx86 10.5.6). Boot from the DVD 5. Follow the instructions from « «; Youtube video ( see notes on Update Nov 1, 2014) on how to install the OSX Leopard on the internal SSD memory of the EeePC 900. How to prepare (partition) the second EeePC 900 SSD memory and what cutomizations to choose for the installation of OSX 10.5.6 6. Make sure NOT to choose any Audio drivers during Customize. Also Ethernet can be passed on since the Attansic L1 driver of Customize does not work either.

Also, Wireless does not work (we’ll see workarounds for these). During Customize in « Fixes and Patches» make sure in « PS/2 Device Support» you check PS/2 Mouse Fix NOT Keyboard Fix. The video instructions here are WRONG. After installation and Reboot follow the instructions of « «; Youtube video ( see notes on Update Nov 1, 2014) for the post-installation configuration of the system. If during the first reboot or even later on the system freezes on boot (stay on «apple screen with the revolving cursor indefinetly) or reports kernel panic, don’t panic. Power off the system by pressing the power button for a while and (it might be necessary to) remove and replug the battery.

How To Install Ipc Osx86 On Pc Mac

Has worked for me. After the initial installation almost everything works! Display works, camera works, keyboard and mouse work. What doesn’t work. Ethernet, Wireless, Audio don’t work. To make them work do the following 12. Do NOT get the Dell 1390 minicard (as many suggest in the forums) to replace the internal wireless card of the EeePC 900.

You probably cannot find it (easyly) outside US and it’s hell to do the replacement. You must literally take the EeePC 900 apart. Get a cheap (around 19€) USB wireless dongle based on Realtek RTL8187B chip (that’s what I did) and download the « RealtekRTL8187BMacOS10.5Driver1148UI157.zip» driver (from Realtek site) and install it on your OSX system ( run the install.pkg to do it). You have wireless.

Or maybe the RTL8187Bt.kext from could work (unzip and use Kext Helper to install the kext). I did the first choice. UPDATE 2 Mar 2014 You can also use (maybe) a wireless dongle based on Ralink rt2870/rt3070 chip. The cd that comes with the wireless usb dongle includes drivers for Mac OS X 10.4, 10.5 and 10.6. For some strange reason, even though the system identified the USB wireless dongle after the driver installation, no connection could be established to the home wireless network. It seems to connect randomly.

How To Install Ipc Osx86 On Pc Windows

Get the VoodooHDA kext (it’s in a zip file, see the README also) from « «; and install it with Kext Helper. The site has instructions also about what to chose and how to install it. I chose the 0.2.2r8Thireuspatchedlight and it works fine. Get the kext ( driver) « AttansicL2Ethernet090224.kext.zip» for the EeePC 900 ethernet adapter from « «; and install it using kext helper.

To have proper Mac control keys, goto System Preferences/Keyboard & Mouse/Kyboard/Modifier Keys and switch Option Key and Command Key. Then the Windows Key will function as Command Key and the Alt Key will function as Option Key, just like in real MacBook. Now you have a fully functioning MacEee with OS X Leopard 10.5.6 Almost. The Fn (blue) keys don’t work. Also instructions from « «; can be usefull especially if you want to transfer the OSX installation to a SD card or an external USB Disk (using Carbon Copy Cloner or SuperDuper!) and must make the partition bootable.

Links to download vital drivers and programs Creating a clone of your EeePC 900 OSx86 (iPC 10.5.6) installation onto an external USB disk or a SD card (8GB). Boot your MacEee. Plug the USB disk into the EeePC. If it’s too large and you want to use only part of it for Mac OSX installation then use Disk Utility to partition it into 2 partitions (I have 320GB external USB disk, split it like 60GB for OSX and the rest ofro other uses). Start Disk Utility- select external disk- select 2 partitions and use the cursor at the split line between the 2 partitions to drag the line up and down to define the size of each partiton. Click on the «options» button and select MRB for boot.

Select the smaller partition (1st one ususally) and initialize it as « Mac OS Extended (Journaled)«, by usind Erase action. Give it a name like « Mac HD» (w/o the quotes). Run Carbon Copy Cloner (or SuperDuper!) to clone the internal SSD OSX system (Mac SSD – source) to the external disk partition (Mac HD – destination). When the copying process finishes, run Universal OSx86 Installer to make the USB disk OSX partistion bootable. Run UInstaller- choose Mac HD- select ONLY « Install PCEFI v9 Chameleon Edition 1.0.12«- click Install.

When it finishes you have a fully working bootable external OSX 10.5.6 disk for you EeePC 900. Now you have plenty of space and you can install plenty of programs on that USB disk to expand your MacEee, like LibreOffice and stuff.